Dewalt DW721 Manual

The Dewalt DW721 is a powerful and versatile miter saw designed for precision cutting in various materials. It features a robust motor, adjustable bevel settings, and a laser guide for enhanced accuracy. This manual provides essential information on safety, features, setup, operation, and maintenance.

Features at a Glance

Key components: Powerful motor, adjustable bevel, laser guide, and durable construction.

Feature	Description
Powerful Motor	Delivers high performance for various cutting tasks.
Adjustable Bevel	Allows for precise angle cuts.
Laser Guide	Helps in aligning cuts accurately.
Durable Construction	Built to withstand heavy use.

Installation

Unpack the saw and inspect for any damage. Place it on a stable surface.

1. Attach the saw to a workbench or stand for stability.
2. Ensure the power cord is properly connected.
3. Check all safety features before use.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw and familiarize yourself with its controls.

1. Adjust the blade height and angle as needed.
2. Test the laser guide alignment.
3. Perform a dry run without material to ensure everything functions correctly.

CAUTION! Always wear safety gear when operating the saw.

Specifications

• Motor Power: 15 Amps.
• Blade Size: 12 inches.
• Bevel Capacity: 0-45 degrees.
• Weight: 50 lbs.
• Laser Guide: Yes.
• Power Source: 120V AC.

Controls and Settings

Access the settings via the control panel. Key controls include power switch, bevel adjustment, and height adjustment.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before connecting any devices.

1. Connect the saw to a power outlet using the provided cord.
2. Use compatible accessories for optimal performance.

Tip: Always check connections before powering on.

Operating the Saw

Follow these steps for safe operation:

1. Power on the saw and set the desired angle.
2. Place the material securely against the fence.
3. Activate the saw and make the cut.
4. Turn off the saw after completing the cut.

WARNING! Keep hands clear of the blade at all times.

Maintenance

Regular maintenance is essential for optimal performance.

1. Clean the saw after each use.
2. Check and replace the blade as needed.
3. Inspect electrical components for wear.

CAUTION! Unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines to prevent accidents.

• Wear appropriate safety gear.
• Keep the work area clean and well-lit.
• Do not operate the saw under the influence of drugs or alcohol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	No power	Check power source and connections.
Blade not cutting	Dull blade	Replace with a new blade.
Excessive vibration	Loose components	Tighten all screws and bolts.
Laser misalignment	Improper setup	Adjust the laser guide as per instructions.

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Dewalt customer service for assistance.