Dewalt DW733 Planer User Manual

The Dewalt DW733 is a powerful 12-inch portable planer designed for professional woodworkers. It features a 15-amp motor that delivers a smooth finish and can handle a variety of wood types. With a maximum cutting depth of 1/8 inch and a feed rate of 28 feet per minute, this planer is perfect for both rough and finished surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 12-inch cutting width, adjustable depth control, and integrated dust port.

Feature	Description
15-amp motor	Powerful motor for efficient cutting
12-inch cutting width	Wide surface area for larger boards
Adjustable depth control	Precise depth settings for various applications
Integrated dust port	Connects to vacuum for cleaner workspace
Portable design	Easy to transport and store

Installation

Unpack and inspect contents. Place on a stable surface.

Ensure the workspace is clean and free of debris.
Connect the power cord to a suitable outlet.
Attach the dust collection system if desired.

WARNING! Ensure the planer is securely positioned before use.

First-Time Setup

Power on the planer and adjust the depth settings according to your project needs.

Set the desired cutting depth using the depth adjustment knob.
Ensure the material is properly secured before planing.

CAUTION! Always wear appropriate safety gear when operating the planer.

Specifications

Motor: 15-amp, 120V.
Cutting Width: 12 inches.
Maximum Cutting Depth: 1/8 inch.
Feed Rate: 28 feet per minute.
Weight: 80 lbs.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel.

Safety Features: Includes a safety lock to prevent accidental start.

Connecting Devices

Connect the dust collection system to the integrated dust port for optimal performance.

Ensure the planer is turned off before connecting any devices.
Match the dust port to the vacuum hose.

Tip: Regularly check the dust collection system for clogs.

Operating the Planer

Follow these steps for effective planing:

Power on the planer and set the desired depth.
Feed the material slowly and steadily through the planer.
Monitor the output for a smooth finish.

WARNING! Do not force the material; let the planer do the work.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the blades and dust port after each use.
Check for any loose screws or parts.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Read all safety instructions before operating the planer.

Wear safety goggles and ear protection.
Keep hands away from moving parts.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power supply issue	Check power cord and outlet.
Uneven cut	Blades dull	Sharpen or replace blades.
Excessive noise	Loose parts	Tighten all screws and components.

Service: For support, contact Dewalt customer service.