Dewalt DW735 13 Planer Manual

The Dewalt DW735 is a powerful 13-inch planer designed for professional woodworkers and DIY enthusiasts. It features a two-speed gear box for optimal cutting performance, a 20,000 RPM motor, and a 3-knife cutter head for a smooth finish. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 13-inch planing capacity, two-speed gear box, 20,000 RPM motor, 3-knife cutter head, and integrated dust port.

Feature	Description
Two-speed gear box	Allows for optimal cutting speed and finish quality
20,000 RPM motor	Provides powerful performance for smooth planing
3-knife cutter head	Delivers a superior finish and longer knife life
Integrated dust port	Connects to dust collection systems for cleaner operation
Adjustable depth control	Allows for precise depth adjustments for various applications

Installation

Unpack and inspect the planer. Place it on a stable work surface.

Ensure the area is clear of debris and hazards.
Connect the planer to a suitable power source.
Attach the dust collection system if available.
Adjust the height and ensure the planer is level.

WARNING! Ensure proper electrical connections to avoid hazards.

First-Time Setup

Power on the planer and familiarize yourself with the controls.

Set the desired planing depth using the depth adjustment knob.
Choose the appropriate speed setting based on the material.
Run a test piece to ensure settings are correct.

CAUTION! Always wear safety goggles and hearing protection during operation.

Specifications

Planing Width: 13 inches.
Motor Speed: 20,000 RPM.
Cutter Head: 3-knife system.
Weight: 80 lbs.
Power Source: 120V AC.
Dust Port Size: 2-1/2 inches.
Planing Depth: Up to 1/8 inch per pass.

Controls and Settings

Access the depth adjustment knob and speed selector on the front panel. Ensure the power switch is easily accessible during operation.

Tip: Familiarize yourself with the location of all controls before starting.

Connecting Devices

Connect the dust collection system to the integrated dust port for cleaner operation.

Ensure the planer is turned off before connecting any devices.
Match the dust port to the appropriate hose size.

Tip: Regularly check and clean the dust collection system for optimal performance.

Operating the Planer

Follow these steps to operate the planer effectively.

Power on the planer and set the desired depth.
Feed the wood slowly and steadily into the planer.
Monitor the output for quality and adjust settings as necessary.

WARNING! Keep hands clear of the cutter head during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the cutter head and remove any debris after use.
Check and replace knives as needed.
Inspect electrical connections and cords for wear.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always follow safety guidelines when operating the planer.

Wear appropriate personal protective equipment (PPE).
Keep the work area clean and well-lit.
Do not operate the planer with damaged parts.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power supply issue	Check power cord and outlet.
Uneven cuts	Improper depth setting	Adjust depth and re-test.
Excessive noise	Worn cutter blades	Inspect and replace blades as necessary.
Dust collection ineffective	Clogged dust port	Clear any blockages in the dust collection system.

Reset: Ensure all settings are correct and power cycle the planer if needed.