Dewalt DW735 XE Manual

The Dewalt DW735 XE is a powerful 13-inch thickness planer designed for professional woodworkers. It features a two-speed gear box for optimal cutting speed and finish, a 20,000 RPM cutter head speed, and a 3-blade system that provides a smooth finish on hardwoods and softwoods alike. The DW735 XE is equipped with a material removal gauge and an adjustable infeed/outfeed table to ensure precision and ease of use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 13-inch cutting width, two-speed gear box, 20,000 RPM cutter head speed, 3-blade system, material removal gauge, adjustable infeed/outfeed tables.

Feature	Description
Two-speed gear box	Allows for optimal cutting speed and finish
20,000 RPM cutter head speed	Provides a smooth finish on various wood types
3-blade system	Ensures efficient and effective material removal
Material removal gauge	Helps in measuring the thickness of the material being planed
Adjustable infeed/outfeed tables	Enhances stability and precision during operation

Installation

Unpack and inspect the contents. Place the planer on a stable surface.

Ensure the area is clean and free of debris.
Connect the planer to a power source that meets the specifications.
Adjust the infeed and outfeed tables for optimal performance.

WARNING! Ensure the planer is securely positioned to avoid accidents.

First-Time Setup

Power on the planer and follow the setup instructions.

Adjust the cutting depth using the depth adjustment knob.
Set the desired speed using the gear selector.
Feed the wood into the planer slowly and steadily.

CAUTION! Always wear safety goggles and ear protection when operating the planer.

Specifications

Planer Width: 13 inches.
Cutter Head Speed: 20,000 RPM.
Blades: 3-blade system.
Power Source: 120V AC.
Weight: 80 lbs.
Dimensions: 25 x 20 x 18 inches.

Controls and Settings

Access the depth adjustment knob and speed selector on the front panel. The power switch is located on the side for easy access.

Tip: Familiarize yourself with the controls before operating the planer.

Connecting Devices

Ensure the planer is connected to a suitable power source. Use extension cords rated for the power requirements if necessary.

Turn off the planer before connecting to power.
Ensure all connections are secure.

Tip: Avoid using damaged cords or outlets.

Operating the Planer

Follow these steps to operate the planer effectively.

Power on the planer and select the desired speed.
Feed the wood into the planer slowly and steadily.
Monitor the thickness gauge for accurate measurements.

WARNING! Keep hands clear of the cutting area at all times.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the planer after each use.
Inspect and replace blades as needed.
Lubricate moving parts according to the manual.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always follow safety guidelines when operating the planer. Wear appropriate personal protective equipment and ensure a clean workspace.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power source issue	Check power connection and switch.
Uneven cuts	Blades dull	Inspect and replace blades as necessary.
Excessive noise	Loose parts	Tighten all screws and bolts.
Wood jamming	Incorrect feed rate	Adjust feed rate and ensure wood is straight.

Service: Contact Dewalt customer service for further assistance.