Dewalt DW743 Manual

The Dewalt DW743 is a powerful and versatile table saw designed for professional contractors and serious DIY enthusiasts. It features a robust 15-amp motor, a 10-inch blade, and a portable design that allows for easy transport to job sites. The DW743 is equipped with a rack and pinion fence system for accurate cuts, a dust collection port for cleaner operation, and adjustable bevel and height settings for various cutting applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 15-amp motor, 10-inch blade, rack and pinion fence, dust collection port, adjustable bevel and height settings.

Feature	Description
15-amp motor	Provides ample power for cutting through various materials.
10-inch blade	Standard blade size for versatile cutting options.
Rack and pinion fence	Ensures accurate and smooth adjustments for precise cuts.
Dust collection port	Helps maintain a clean workspace by connecting to a vacuum.
Adjustable bevel	Allows for angled cuts up to 45 degrees.
Portable design	Easy to transport to different job sites.

Installation

Unpack the saw and inspect all components. Set up on a stable surface.

1. Attach the legs: Follow the included instructions to secure the legs to the saw.
2. Connect the power cord: Ensure the saw is unplugged before connecting to a power source.
3. Adjust the blade height and angle: Set according to your cutting needs.
4. Test the saw: Run the saw briefly to ensure proper operation.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw and familiarize yourself with its features.

1. Adjust the fence: Ensure it is parallel to the blade for accurate cuts.
2. Set the blade height: Adjust to the thickness of the material being cut.
3. Check the bevel angle: Set to 0 degrees for straight cuts or adjust as needed.
4. Perform a test cut: Use scrap material to ensure settings are correct.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

• Motor: 15-amp.
• Blade Size: 10 inches.
• Cutting Capacity: 24.5 inches to the right of the blade.
• Bevel Capacity: 0 to 45 degrees.
• Weight: 60 lbs.
• Dust Collection: 2-1/2 inch port.
• Power Source: 120V AC.

Controls and Settings

Access the main controls on the front panel: power switch, blade height adjustment, and bevel angle adjustment.

Safety Features: Blade guard, anti-kickback pawls, and push stick for safe operation.

Connecting Devices

Ensure all devices are compatible with the saw's power requirements.

1. Turn off the saw before connecting any devices.
2. Use appropriate extension cords if needed.
3. Ensure all connections are secure before powering on.

Tip: Always check the power rating of connected devices to avoid overload.

Operating the Saw

Follow these steps for safe and effective operation:

1. Power on the saw and allow it to reach full speed.
2. Feed material slowly and steadily into the blade.
3. Use the fence for straight cuts and the miter gauge for angled cuts.
4. Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Safety Features

The DW743 is equipped with several safety features to protect the user:

• Blade guard to prevent accidental contact.
• Anti-kickback pawls to keep the material in place.
• Emergency stop switch for quick shutdown.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down surfaces; avoid using liquids.

CAUTION! Regularly check and clean the dust collection port to maintain performance.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Motor won't start	Power source issue	Check power cord and outlet.
Blade not spinning	Blade lock engaged	Ensure blade lock is released.
Inconsistent cuts	Fence misalignment	Adjust the fence for accuracy.
Excessive vibration	Improper setup	Ensure saw is on a stable surface.

Reset: Follow the manual for resetting settings if necessary.

Service: For service inquiries, contact Dewalt customer support.