Dewalt DW744 Type 2 Manual

The Dewalt DW744 Type 2 is a powerful table saw designed for both professional and DIY users. It features a 10-inch blade, a robust motor, and a portable design, making it ideal for various woodworking tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10-inch blade, powerful motor, adjustable fence, and portable design.

Feature	Description
10-inch Blade	For cutting various materials with precision.
Powerful Motor	Delivers high performance for tough cuts.
Adjustable Fence	Ensures accurate cuts and easy adjustments.
Portable Design	Easy to transport for on-site jobs.
Safety Guard	Protects user from blade exposure.
Dust Port	Connects to vacuum for cleaner workspace.

Installation

Unpack and inspect contents. Place on a stable surface.

Assemble the stand: Follow the included instructions to set up the stand.
Attach the blade: Ensure the blade is properly secured before use.
Connect the power: Plug into a suitable outlet.
Check alignment: Ensure the fence and blade are aligned correctly.

WARNING! Always ensure the saw is unplugged when making adjustments.

First-Time Setup

Power on the saw; follow the setup instructions.

Adjust the blade height: Set to desired cutting depth.
Set the fence: Adjust to the width of the material being cut.
Test run: Perform a test cut on scrap material.

CAUTION! Always wear safety gear during operation.

Specifications

Blade Size: 10 inches.
Motor Power: 15 Amps.
Table Size: 26 x 22 inches.
Cutting Capacity: 3-1/8 inches at 90 degrees.
Weight: 90 lbs.
Power Source: 120V AC.
Operating Temp: Standard room temperature.

Controls and Settings

Access settings via the control panel. Key controls include power switch, blade height adjustment, and fence adjustment.

Safety Features: Blade guard, anti-kickback pawls, and push stick.

Connecting Devices

Ensure all devices are compatible with the saw.

Turn off the saw before connecting any devices.
Use appropriate cables for power and dust collection.
Follow the manufacturer's instructions for connecting accessories.

Tip: Always check connections before powering on.

Operating the Saw

Follow these steps for safe operation.

Power on the saw and allow it to reach full speed.
Feed material slowly and steadily through the blade.
Use push sticks for small pieces to keep hands away from the blade.
Turn off the saw after completing cuts.

WARNING! Never reach over the blade while it is running.

Safety Features

Includes blade guard, anti-kickback pawls, and emergency stop switch.

Care & Cleaning

Unplug before cleaning. Use a dry cloth to wipe the surface; avoid liquids.

CAUTION! Do not use abrasive cleaners; keep away from moisture.

Regulatory Information

Complies with safety standards for power tools. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Uneven cuts	Fence misalignment	Adjust the fence for accuracy.
Excessive vibration	Blade issue	Check blade for damage; replace if necessary.
Overheating	Continuous use	Allow the saw to cool down before further use.

Service: For assistance, contact Dewalt customer service.