Dewalt DW745 Type 1 Manual

The Dewalt DW745 Type 1 is a portable table saw designed for precision and ease of use. It features a powerful motor, a 10-inch blade, and a durable construction that makes it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10-inch blade, adjustable rip fence, onboard storage for accessories, and a lightweight design for portability.

Feature	Description
Powerful Motor	Provides ample power for cutting various materials.
10-inch Blade	Allows for precise cuts and versatility in applications.
Adjustable Rip Fence	Ensures accurate cuts and easy adjustments.
Onboard Storage	Convenient storage for accessories and tools.
Lightweight Design	Easy to transport and set up on job sites.

Installation

Unpack and inspect contents. Set up on a stable surface.

Assemble the table saw according to the manual.
Ensure all parts are securely attached.
Plug into a suitable power source.

WARNING! Ensure the saw is on a stable surface to avoid accidents.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the blade height and angle as needed.
Set the rip fence for desired width of cut.
Test the saw with a scrap piece of wood.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 10 inches.
Motor Power: 1850 watts.
Table Size: 26 inches x 22 inches.
Max Cut Depth: 3-1/8 inches at 90 degrees.
Weight: 45 pounds.
Power Source: 120V AC.

Controls and Settings

Access controls via the front panel: power switch, blade height adjustment, and angle adjustment.

Safety Features: Blade guard, anti-kickback pawls, and push stick for safe operation.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect to a power outlet using the provided cord.
Use appropriate extension cords if necessary.

Tip: Always check the power rating of extension cords used.

Operating the Saw

Follow these steps for safe operation:

Ensure all safety features are in place.
Adjust settings as needed for your cut.
Start the saw and make your cut, keeping hands clear of the blade.

WARNING! Never reach over the blade while it is running.

Safety Features

The Dewalt DW745 Type 1 includes several safety features to protect the user:

Blade guard to prevent accidental contact.
Anti-kickback pawls to keep the material in place.
Emergency power switch for quick shut-off.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down surfaces; avoid using liquids.

CAUTION! Keep the saw away from moisture to prevent electrical hazards.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	No power	Check power source and connections.
Blade not cutting	Dull blade	Replace or sharpen the blade.
Excessive vibration	Improper setup	Ensure the saw is level and stable.
Noise during operation	Loose parts	Tighten all screws and fittings.

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Dewalt customer service for assistance.