Dewalt DW746 Table Saw Manual

The Dewalt DW746 is a powerful table saw designed for precision cutting and durability. It features a 10-inch blade, a robust motor, and a variety of safety features to ensure user protection. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Table Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 10-inch blade, adjustable fence, powerful motor, and safety guard.

Feature	Description
10-inch Blade	For precise cutting of various materials
Adjustable Fence	Ensures accurate cuts and easy adjustments
Powerful Motor	Delivers consistent performance for tough jobs
Safety Guard	Protects user from accidental contact with the blade
Dust Port	Connects to vacuum for efficient dust collection

Installation

Unpack and inspect contents. Place the table saw on a stable surface.

Assemble the stand: Follow the included instructions for assembly.
Connect the power supply: Ensure the saw is plugged into a grounded outlet.
Adjust the blade height: Set the blade to the desired cutting height.
Check alignment: Ensure the fence is parallel to the blade.

WARNING! Ensure all connections are secure and the area is clear before operating.

First-Time Setup

Power on the table saw; follow the setup instructions provided.

Check blade alignment: Use a square to ensure the blade is square to the table.
Set the fence: Adjust the fence to the desired measurement for your cut.
Test run: Perform a test cut on scrap wood to ensure settings are correct.

CAUTION! Always wear safety gear when operating the table saw.

Specifications

Blade Diameter: 10 inches.
Motor Power: 15 Amps.
Table Size: 30 inches x 20 inches.
Weight: 200 lbs.
Cutting Capacity: 3-1/8 inches at 90 degrees.
Dust Collection: 2-1/2 inches port.
Voltage: 120V AC.

Controls and Settings

Access controls via the front panel: Power switch, blade height adjustment, and fence adjustment.

Safety Features: Blade guard, anti-kickback pawls, and push stick.

Connecting Devices

Ensure the table saw is unplugged before connecting any devices.

Connect dust collection: Attach vacuum hose to the dust port.
Use proper extension cords: Ensure they are rated for the saw's power requirements.

Tip: Always check connections before operating the saw.

Operating the Table Saw

Follow these steps for safe operation:

Turn on the saw: Use the power switch located on the front panel.
Make your cut: Feed the material slowly and steadily through the blade.
Turn off the saw: Use the power switch to turn off the saw after completing your cut.

WARNING! Never reach over the blade while it is running.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Inspect power cords for damage.
Lubricate moving parts as needed.

Safety Information

Always follow safety guidelines to prevent accidents:

Wear safety goggles and hearing protection.
Keep hands away from the blade.
Do not operate the saw in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Uneven cuts	Blade alignment	Adjust blade and fence alignment.
Excessive vibration	Loose components	Check and tighten all screws and bolts.
Dust collection ineffective	Clogged port	Clear dust from the collection port.

Service: Contact Dewalt customer service for further assistance.