Dewalt DW749RS Manual

The Dewalt DW749RS is a powerful table saw designed for professional carpenters and contractors. It features a 10-inch blade, a robust motor, and a rolling stand for easy transport. This saw is ideal for cutting a variety of materials, including hardwood, softwood, and plywood. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 10-inch blade, powerful motor, rolling stand, adjustable fence, and dust collection port.

Feature	Description
10-inch Blade	For cutting various materials with precision.
Powerful Motor	Provides consistent performance for heavy-duty tasks.
Rolling Stand	Easy to transport and set up on job sites.
Adjustable Fence	Ensures accurate cuts and measurements.
Dust Collection Port	Helps maintain a clean workspace by minimizing debris.

Installation

Unpack and inspect contents. Set up the saw on a stable surface.

1. Assemble the rolling stand: Follow the included instructions for assembly.
2. Attach the blade: Ensure the saw is unplugged before changing the blade.
3. Connect the dust collection system: Attach the hose to the dust port.
4. Plug into AC power: Ensure the voltage matches the saw's requirements.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

1. Adjust the blade height: Use the height adjustment knob for desired cutting depth.
2. Set the fence: Align the fence with the blade for accurate cuts.
3. Test the saw: Make a few test cuts on scrap wood to ensure everything is functioning properly.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

• Blade Size: 10 inches.
• Motor Power: 15 amps.
• Cutting Capacity: 24 inches to the right of the blade.
• Weight: 90 lbs.
• Dimensions: 30 x 30 x 36 inches.
• Power Source: 120V AC.
• Dust Collection: 2-1/2 inch port.

Controls and Settings

Access the main controls on the front panel: Power switch, blade height adjustment, and fence adjustment.

Safety Features: Blade guard, anti-kickback pawls, and push stick for safe operation.

Connecting Devices

Ensure all devices are compatible with the saw's specifications.

1. Turn off the saw before making any connections.
2. Use appropriate extension cords if needed.
3. Ensure all connections are secure before powering on.

Tip: Always check for any loose connections before operating the saw.

Operating the Saw

Follow the operating instructions for safe and effective use.

1. Power on the saw: Ensure the blade is clear of any obstructions.
2. Make your cut: Use the fence for straight cuts and maintain a steady feed rate.
3. Power off after use: Always unplug the saw when not in use.

WARNING! Keep hands away from the blade while operating.

Safety Features

The Dewalt DW749RS is equipped with several safety features to protect the user during operation.

• Blade guard: Prevents accidental contact with the blade.
• Anti-kickback pawls: Help prevent the workpiece from being thrown back.
• Emergency stop: Quickly power off the saw in case of an emergency.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to remove dust and debris.

CAUTION! Do not use liquids or aerosols on the saw.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power source and connections.
Uneven cuts	Improper setup	Ensure fence is aligned correctly.
Excessive vibration	Loose components	Tighten all screws and bolts.
Dust collection ineffective	Clogged port	Check and clear dust collection port.

Reset: Refer to the manual for reset instructions if available.

Service: For service inquiries, contact Dewalt customer support.