Dewalt DW756 6-Inch Bench Grinder Manual

The Dewalt DW756 is a powerful 6-inch bench grinder designed for sharpening, shaping, and polishing metal. It features a robust motor, adjustable tool rests, and a durable construction, making it ideal for both professional and DIY applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Grinder 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6-inch grinding wheels, adjustable tool rests, heavy-duty motor, and safety guards.

Feature	Description
Heavy-duty motor	Provides reliable power for grinding tasks
Adjustable tool rests	Allows for precise grinding angles
Safety guards	Protects user from debris and sparks
Grinding wheels	Includes coarse and fine wheels for versatile use
Sturdy base	Minimizes vibration during operation

Installation

Unpack and inspect contents. Place on a stable workbench.

Ensure the work area is clean and well-lit.
Secure the grinder to the workbench using bolts.
Connect to a suitable power source.
Check that all safety guards are in place.

WARNING! Ensure the grinder is unplugged during installation.

First-Time Setup

Power on the grinder; ensure it runs smoothly.

Install grinding wheels: Follow instructions for proper installation.
Adjust tool rests to desired angle.
Test the grinder with a scrap piece of metal.

CAUTION! Wear appropriate safety gear during setup.

Specifications

Motor Power: 5 Amp.
Wheel Size: 6 inches.
Speed: 3450 RPM.
Weight: 40 lbs.
Dimensions: 14 x 10 x 10 inches.
Voltage: 120V.
Warranty: 3 years limited.

Controls and Settings

Power switch located on the front panel. Adjust tool rests using the knobs on either side.

Safety Features: Includes overload protection and safety guards.

Connecting Devices

No external devices are required for operation. Ensure proper power connection.

Turn off the grinder before connecting to power.
Use a grounded outlet for safety.

Tip: Always check power cord for damage before use.

Operating the Grinder

Follow these steps for safe operation:

Wear safety goggles and gloves.
Power on the grinder.
Hold the workpiece firmly against the grinding wheel.
Move the workpiece back and forth for even grinding.

WARNING! Do not wear loose clothing or jewelry while operating.

Safety Features

Includes safety guards and overload protection to prevent accidents.

Care & Cleaning

Unplug before cleaning. Use a dry cloth to wipe down the exterior.

CAUTION! Do not use liquids or aerosols for cleaning.

Regulatory Information

This product complies with applicable safety standards. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Grinder won't start	Power source issue	Check power cord and outlet.
Excessive vibration	Improper wheel installation	Reinstall grinding wheels securely.
Overheating	Continuous use	Allow the grinder to cool down.
Noisy operation	Worn bearings	Contact service for repairs.

Reset: Unplug and plug back in to reset.

Service: 1-800-433-9258; www.dewalt.com