Dewalt DW758 8 Inch Bench Grinder Manual

The Dewalt DW758 is a powerful 8-inch bench grinder designed for heavy-duty grinding applications. It features a robust 3/4 HP motor that delivers high performance and durability. The grinder is equipped with two 8-inch wheels, adjustable tool rests, and a built-in work light for enhanced visibility. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Grinder 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 8-inch grinding wheels, adjustable tool rests, built-in work light, heavy-duty motor.

FeatureDescription
8-inch grinding wheelsFor various grinding applications
Adjustable tool restsFor precise grinding angles
Built-in work lightIlluminates work area for better visibility
Heavy-duty motor3/4 HP for high performance
Safety guardsProtects user from debris
On/off switchEasy access for operation

Installation

Unpack and inspect contents. Place on a stable workbench.

  1. Ensure the work area is clean and well-lit.
  2. Secure the grinder to the workbench using bolts.
  3. Connect to a power source: Ensure proper voltage and amperage.
  4. Check that all components are securely attached.

WARNING! Ensure all safety precautions are followed during installation.

First-Time Setup

Power on the grinder; ensure all settings are adjusted before use.

  1. Install the grinding wheels: Follow the manufacturer's instructions.
  2. Adjust the tool rests to the desired angle.
  3. Test the operation: Run the grinder briefly to ensure proper function.

CAUTION! Always wear appropriate safety gear when operating the grinder.

Specifications

Controls and Settings

Access controls via the front panel: On/off switch, speed adjustment (if applicable).

Tool rests: Adjustable for different grinding angles.

Connecting Devices

Ensure the grinder is unplugged before connecting any accessories.

  1. Attach grinding wheels securely.
  2. Connect any additional accessories as per the manufacturer's instructions.

Tip: Always check connections before powering on the grinder.

Operating the Grinder

Follow these steps for safe operation:

  1. Turn on the grinder using the on/off switch.
  2. Allow the grinder to reach full speed before using.
  3. Use appropriate pressure when grinding.
  4. Turn off the grinder when finished and unplug.

WARNING! Do not leave the grinder unattended while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the grinder after each use.
  2. Check and replace grinding wheels as needed.
  3. Inspect electrical components for wear.

CAUTION! Always unplug the grinder before performing maintenance.

Safety Information

Always wear safety goggles and gloves when operating the grinder. Ensure the work area is free from clutter and obstacles.

Troubleshooting

SymptomPossible CauseCorrective Action
Grinder won't startPower source issueCheck power connection and outlet.
Excessive vibrationUnbalanced wheelsCheck and replace wheels if necessary.
Noisy operationWorn bearingsInspect and replace bearings as needed.
OverheatingOveruse or blockageAllow to cool down; check for debris.

Service: Contact Dewalt customer service for assistance.

Dewalt DW758 8 Inch Bench Grinder Manual © - All Rights Reserved 2026