Dewalt DWFP55130 Manual

The Dewalt DWFP55130 is a 6-gallon, 165 PSI pancake compressor designed for a variety of applications. It features a high-efficiency motor for easy start-up in cold weather and a lightweight design for easy portability. The compressor is equipped with two universal quick couplers, allowing for two users to work simultaneously. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 165 PSI max pressure, high-efficiency motor, two quick couplers, and a lightweight design.

Feature	Description
6-gallon tank	Provides ample air supply for various tools
165 PSI max pressure	Delivers high pressure for optimal performance
High-efficiency motor	Ensures easy start-up in cold weather
Two quick couplers	Allows for two users to operate simultaneously
Lightweight design	Easy to transport and maneuver

Installation

Unpack the compressor and inspect for any damage. Place it on a stable surface.

Connect the air hose to the quick coupler.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.

WARNING! Always follow safety precautions when handling the compressor.

First-Time Setup

Power on the compressor and allow it to build pressure.

Set the desired pressure using the regulator.
Check for any air leaks in the connections.
Test the compressor with a tool to ensure proper operation.

CAUTION! Ensure all connections are secure before use.

Specifications

Tank Size: 6 gallons.
Max Pressure: 165 PSI.
Motor: High-efficiency motor for easy start-up.
Weight: Lightweight design for portability.
Noise Level: 75 dBA for quieter operation.
Power Source: 120V AC.

Controls and Settings

Access the pressure regulator and quick couplers for tool connections.

Controls: On/Off switch, pressure regulator, and drain valve.

Connecting Devices

Connect air tools using the quick couplers.

Ensure the compressor is off before connecting tools.
Match the tool's air fitting to the quick coupler.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting tools.

Operating the Compressor

Use the compressor to power various pneumatic tools.

Turn on the compressor and allow it to build pressure.
Use the regulator to set the desired pressure for your tool.
Monitor the pressure gauge during operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance ensures optimal performance.

Drain the tank after each use to prevent moisture buildup.
Check and replace the air filter as needed.
Inspect hoses and connections for wear and tear.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear appropriate personal protective equipment.
Keep the compressor in a well-ventilated area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No pressure	Leak in the system	Inspect for leaks and tighten connections.
Excessive noise	Worn parts	Inspect and replace worn components.
Pressure drops	Tool usage	Check tool for air leaks.

Reset: Disconnect power and reconnect if necessary.

Service: For support, contact Dewalt customer service.