Dewalt DWS709 Manual

The Dewalt DWS709 is a 12-inch double bevel sliding compound miter saw designed for precision and versatility in cutting. It features a powerful motor, adjustable miter and bevel settings, and a durable construction suitable for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 12-inch blade, dual bevel capability, laser guide, adjustable miter angles, and a sturdy base for stability.

Feature	Description
12-inch blade	For cutting through a variety of materials with precision.
Dual bevel	Allows for angled cuts in both directions.
Laser guide	Helps ensure accurate cuts.
Adjustable miter angles	For versatile cutting options.
Sturdy base	Provides stability during operation.

Installation

Unpack and inspect contents. Place on a stable work surface.

1. Attach the saw to a workbench or stand for stability.
2. Ensure the power cord is properly connected to a power source.
3. Check that all safety features are functional before use.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw; follow the setup instructions provided in the manual.

1. Adjust the blade height and angle according to your cutting needs.
2. Calibrate the laser guide for accurate cuts.
3. Familiarize yourself with the controls and settings.

CAUTION! Always wear appropriate safety gear during setup.

Specifications

• Blade Size: 12 inches.
• Motor Power: 15 Amps.
• Bevel Capacity: 0° to 49° left and right.
• Miter Capacity: 0° to 60° left and 0° to 50° right.
• Weight: Approximately 56 lbs.
• Laser Guide: Integrated for precision cutting.
• Power Source: 120V AC.

Controls and Settings

Access the miter and bevel controls located on the front and side of the saw. Ensure all settings are adjusted before operation.

Safety Features: Blade guard, electric brake, and lockout switch.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or connections.

1. Connect the saw to a power source using the provided power cord.
2. Use appropriate extension cords if necessary, ensuring they are rated for the saw's power requirements.

Tip: Always check connections before powering on the saw.

Operating the Saw

Follow these steps for safe and effective operation:

1. Adjust the blade height and angle as needed.
2. Secure the material to be cut.
3. Power on the saw and make the cut.
4. Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Safety Features

The Dewalt DWS709 includes several safety features to protect the user:

• Blade guard to prevent accidental contact.
• Electric brake to stop the blade quickly.
• Lockout switch to prevent unauthorized use.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to remove dust and debris.

CAUTION! Do not use liquids or solvents to clean the saw.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Calibrate the miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Overheating	Continuous use	Allow the saw to cool down before resuming.

Reset: If applicable, refer to the manual for reset instructions.

Service: For service inquiries, contact Dewalt customer support.