Dewalt Miter Saw DW703 Manual

The Dewalt Miter Saw DW703 is a powerful and versatile tool designed for precise crosscuts and miter cuts in a variety of materials. With a 12-inch blade and a robust motor, this saw is perfect for both professional contractors and DIY enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter and bevel angles, laser guide for precision cutting, and a sturdy base for stability.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Adjustable Miter Angles	Allows for accurate miter cuts from 0 to 50 degrees.
Laser Guide	Helps in aligning cuts for increased accuracy.
Dust Collection Port	Connects to a vacuum for cleaner workspace.
Sturdy Base	Provides stability during operation.

Installation

Unpack and inspect contents. Place the saw on a stable surface.

Attach the saw to a workbench or stand for stability.
Connect the power cord to a suitable outlet.
Ensure the blade is properly installed and tightened.

WARNING! Always ensure the saw is unplugged when changing blades or making adjustments.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the miter angle to 0 degrees for straight cuts.
Set the bevel angle if needed for angled cuts.
Test the laser guide alignment before making cuts.

CAUTION! Ensure all adjustments are secure before operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Angle Range: 0 to 50 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 50 lbs.
Dust Collection: Yes, with dust port.

Controls and Settings

Access the miter and bevel adjustments on the front panel. The laser guide can be activated via a switch located on the side.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before connecting any devices or accessories.

Connect a vacuum hose to the dust collection port.
Use the appropriate extension cord if needed.

Tip: Always use a heavy-duty extension cord rated for power tools.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel angles as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Safety Features

The DW703 includes several safety features to protect the user:

Blade guard for protection during operation.
Electric brake to stop the blade quickly.
Safety switch to prevent accidental starts.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; avoid using liquids.

CAUTION! Keep the saw free from dust and debris for optimal performance.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade does not spin	Power issue	Check power cord and outlet.
Laser guide not working	Battery issue	Replace battery in laser guide.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for resetting procedures if applicable.

Service: Contact Dewalt customer service for assistance.