Dewalt Miter Saw DW716 Manual

The Dewalt Miter Saw DW716 is a powerful and versatile tool designed for precision cutting in a variety of materials. It features a 15-amp motor, dual bevel capability, and a 12-inch blade, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 15-amp motor, dual bevel capability, 12-inch blade, adjustable miter angles, and laser guide for precision cutting.

Feature	Description
15-Amp Motor	Provides powerful performance for cutting through various materials.
Dual Bevel Capability	Allows for bevel cuts in both directions for added versatility.
12-Inch Blade	Offers a larger cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts by projecting a line onto the workpiece.
Adjustable Miter Angles	Enables precise angle cuts for various applications.

Installation

Unpack and inspect contents. Ensure a stable and level surface for operation.

Attach the saw to a workbench or stand for stability.
Connect to a power source: Ensure the voltage matches the saw's requirements.
Check all safety features are functional before use.

WARNING! Always wear appropriate safety gear when operating the saw.

First-Time Setup

Power on the saw; familiarize yourself with the controls and settings.

Adjust the miter and bevel settings as needed for your project.
Test the laser guide alignment before making cuts.
Practice cutting scrap material to ensure proper operation.

CAUTION! Ensure the work area is clear of obstacles before operating.

Specifications

Motor Power: 15 Amps.
Blade Size: 12 inches.
Bevel Capacity: Dual bevel (left and right).
Miter Angles: 0-50 degrees left and right.
Weight: Approximately 50 lbs.
Laser Guide: Yes, for precision cutting.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel controls on the front panel. Ensure settings are adjusted before each use.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or connections.

Connect to a power outlet that meets the voltage requirements.
Use appropriate extension cords if necessary, ensuring they are rated for the saw's power.

Tip: Always check connections before powering on the saw.

Operating the Miter Saw

Follow these steps for safe and effective operation:

Adjust the miter and bevel settings as needed.
Secure the material to the workbench or saw base.
Power on the saw and allow it to reach full speed before cutting.
Make the cut, keeping hands clear of the blade.
Power off the saw after use and unplug it.

WARNING! Always keep hands away from the blade during operation.

Safety Features

The Dewalt Miter Saw DW716 is equipped with several safety features to protect the user:

Blade guard to prevent accidental contact.
Electric brake to stop the blade quickly.
Safety switch to prevent accidental start-up.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to remove dust and debris.

CAUTION! Do not use liquids or solvents to clean the saw.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power connection	Check power source and connections.
Blade not spinning	Motor issue	Inspect motor and electrical components.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.

Reset: If applicable, refer to the manual for reset procedures.

Service: For assistance, contact Dewalt customer service.