Dewalt Miter Saw Manual DWS709

The Dewalt DWS709 is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility. It features an adjustable miter system, an integrated laser for accurate cuts, and a durable construction for long-lasting performance. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 12-inch blade, double bevel capability, adjustable miter angles, laser guide, and dust collection system.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Double Bevel	Allows for bevel cuts in both directions.
Laser Guide	Helps ensure accurate cuts.
Adjustable Miter Angles	For precise miter cuts up to 60 degrees.
Dust Collection	Integrated system to minimize debris.

Installation

Unpack the saw and inspect all components. Place the saw on a stable work surface.

Attach the saw to a workbench or stand for stability.
Connect the dust collection system if available.
Ensure the power cord is safely routed away from cutting area.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Adjust the miter and bevel settings as needed.
Test the laser alignment before making cuts.
Practice cutting scrap material to ensure accuracy.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0-48 degrees left and right.
Miter Capacity: 0-60 degrees left, 0-50 degrees right.
Weight: Approximately 56 lbs.
Dust Collection: 1-1/4 inch port.

Controls and Settings

Access the miter and bevel controls located on the front of the saw. The laser guide can be adjusted for alignment.

Safety Features: Blade guard, electric brake, and trigger lock.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

Connect the dust collection hose to the port.
Attach any additional accessories as per the manufacturer's instructions.

Tip: Regularly check connections for wear and tear.

Operating the Saw

Follow these steps for safe operation:

Ensure the workpiece is secured before cutting.
Power on the saw and allow it to reach full speed.
Make the cut, keeping hands clear of the blade.
Power off the saw after completing cuts.

WARNING! Never reach over the blade while it is in motion.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Keep the saw clean and free of debris.
Inspect and replace the blade as needed.
Check electrical connections and power cord for damage.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw won't start	Power supply issue	Check power cord and outlet.
Blade not spinning	Motor failure	Inspect motor and wiring.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Worn blade	Replace blade and check for damage.

Service: For assistance, contact Dewalt customer service.