Dewalt Model DWE7491 10 Inch Table Saw Manual

The Dewalt Model DWE7491 is a powerful 10-inch table saw designed for professional carpenters and DIY enthusiasts. It features a high-performance motor, a large rip capacity, and a portable design, making it ideal for both job site and home use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Table Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10-inch carbide blade, rack and pinion fence system, onboard storage, and a powerful 15-amp motor.

Feature	Description
15-Amp Motor	Delivers the power to cut through hardwoods and softwoods.
Rack and Pinion Fence System	Ensures accurate cuts and easy adjustments.
Onboard Storage	Conveniently stores accessories and components.
Portability	Lightweight design for easy transport.
Blade Guard	Provides safety during operation.

Installation

Unpack and inspect contents. Place on a stable surface.

Assemble the table saw according to the instructions provided.
Ensure all components are securely attached.
Plug into a suitable power outlet.

WARNING! Ensure the saw is on a stable surface to avoid accidents.

First-Time Setup

Power on the table saw; follow the setup instructions.

Adjust the blade height and angle for desired cuts.
Set the fence to the required width for ripping.
Test the saw with a scrap piece of wood.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 10 inches.
Motor Power: 15 Amps.
Rip Capacity: 32-1/2 inches.
Weight: 90 lbs.
Table Size: 26 inches x 22 inches.
Cutting Depth: 3-1/8 inches at 90 degrees.
Power Source: 120V AC.

Controls and Settings

Access the main controls on the front panel, including the power switch, blade height adjustment, and angle adjustment.

Safety Features: Blade guard, anti-kickback pawls, and push stick for safe operation.

Connecting Devices

Ensure the table saw is unplugged before making any adjustments or connections.

Connect the saw to a power source using a suitable extension cord if necessary.
Ensure all safety features are in place before operating.

Tip: Always check the power supply before use.

Operating the Table Saw

Follow the operating instructions for safe and effective use.

Turn on the saw and allow it to reach full speed before making cuts.
Use the fence for straight cuts and the miter gauge for angled cuts.
Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is running.

Safety Features

The table saw is equipped with several safety features to prevent accidents.

Blade Guard: Protects user from accidental contact with the blade.
Anti-Kickback Pawls: Prevents the workpiece from being thrown back.
Emergency Stop: Quickly shuts off power in case of an emergency.

Care & Cleaning

Unplug the table saw before cleaning. Use a dry cloth to wipe down surfaces.

CAUTION! Do not use liquids or aerosols on the saw.

Regulatory Information

This table saw complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table saw won't start	Power supply issue	Check power cord and outlet.
Blade not cutting	Dull blade	Replace or sharpen the blade.
Excessive vibration	Improper setup	Ensure the saw is level and stable.
Kickback occurs	Improper feeding	Use push stick and maintain control.

Reset: Refer to the manual for resetting the saw if necessary.

Service: For service inquiries, contact Dewalt customer support.