Dewalt Owners Manual DW718

The Dewalt DW718 is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility in cutting various materials. It features a robust motor, dual bevel capability, and a laser guide for enhanced accuracy. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, laser guide, adjustable miter angles, and a sturdy base.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Dual Bevel Capability	Allows for angled cuts in both directions.
Laser Guide	Helps in aligning cuts accurately.
Adjustable Miter Angles	For versatile cutting options.
Sturdy Base	Provides stability during operation.

Installation

Unpack and inspect contents. Place on a stable surface.

Attach the saw to a workbench or stand for stability.
Ensure all safety guards are in place before use.
Connect to a power source as per the specifications.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the blade height and angle as needed.
Calibrate the laser guide for accurate cuts.
Test the saw with scrap material before actual use.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 Amp.
Bevel Capacity: 0° to 48° left and right.
Miter Capacity: 0° to 60° left and 0° to 50° right.
Weight: 56 lbs.
Laser Guide: Yes, included.
Power Source: 120V AC.

Controls and Settings

Access settings via the control panel. Features include blade height adjustment, bevel angle adjustment, and miter angle settings.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect to a power source using the provided cord.
Use appropriate extension cords if necessary.

Tip: Always check the power rating of extension cords used.

Operating the Saw

Follow these steps for safe operation:

Ensure all safety guards are in place.
Adjust the blade and miter settings as required.
Power on the saw and allow it to reach full speed before cutting.
Use both hands to guide the material through the blade.

WARNING! Never reach under the blade while it is in motion.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Inspect the saw for any loose parts or damage.
Store in a dry place when not in use.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Read all safety instructions before operating the saw. Always wear appropriate personal protective equipment (PPE).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet.
Blade not spinning	Motor issue	Inspect motor and connections.
Inaccurate cuts	Misalignment	Check and adjust blade alignment.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for reset instructions if available.