Dewalt Owners Manual DW735

The Dewalt DW735 is a powerful 13-inch thickness planer designed for professional woodworkers and DIY enthusiasts. It features a 15-amp motor that delivers a smooth finish on hardwoods and softwoods alike. The DW735 includes a two-speed gear box for optimal cutting speed and a fan-assisted chip ejection system that ensures a clean workspace. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 13-inch cutting width, 15-amp motor, two-speed gear box, fan-assisted chip ejection, and adjustable depth control.

Feature	Description
13-inch Cutting Width	Handles wider boards with ease
15-amp Motor	Powerful motor for efficient cutting
Two-Speed Gear Box	Allows for different cutting speeds
Fan-Assisted Chip Ejection	Keeps workspace clean by ejecting chips
Adjustable Depth Control	Precise depth adjustments for accurate cuts

Installation

Unpack and inspect the contents. Place the planer on a stable surface.

Ensure the area is clear and well-lit.
Connect the planer to a suitable power outlet.
Adjust the height of the infeed and outfeed tables for optimal performance.

WARNING! Ensure the planer is securely positioned to avoid tipping during operation.

First-Time Setup

Power on the planer and familiarize yourself with the controls.

Set the desired cutting depth using the depth adjustment knob.
Feed the wood slowly and steadily for the best results.
Use the two-speed setting to adjust for different wood types.

CAUTION! Always wear safety goggles and ear protection while operating the planer.

Specifications

Planer Width: 13 inches.
Motor: 15-amp.
Speed: Two-speed gear box (96 and 179 cuts per minute).
Weight: 80 lbs.
Chip Ejection: Fan-assisted.
Depth Capacity: 1/8 inch to 1/2 inch.
Power Source: 120V AC.

Controls and Settings

Access the depth adjustment knob and speed selector on the front panel. The power switch is located on the side for easy access.

Tip: Always adjust the depth before powering on the planer.

Connecting Devices

Ensure the planer is connected to a power source. Use extension cords rated for the power requirements if necessary.

Turn off the planer before connecting or disconnecting power.
Use appropriate extension cords for longer distances.

Tip: Keep the power cord away from the cutting area to avoid accidents.

Operating the Planer

Follow these steps for optimal operation:

Power on the planer and set the desired depth.
Feed the wood into the planer slowly.
Monitor the output for consistent thickness.

WARNING! Do not place hands near the cutting area while the planer is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the planer after each use to remove wood chips and dust.
Check and replace blades as necessary.
Lubricate moving parts as per the manufacturer's instructions.

Safety Information

Always follow safety guidelines when operating the planer:

Wear safety goggles and ear protection.
Keep hands away from the cutting area.
Do not operate the planer in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power supply issue	Check power cord and outlet.
Uneven cuts	Improper depth setting	Adjust depth control for even thickness.
Excessive noise	Worn blades	Inspect and replace blades as needed.
Wood jams	Incorrect feeding	Feed wood slowly and steadily.

Service: For further assistance, contact Dewalt customer service.