Dewalt Planer 734 Manual

The Dewalt Planer 734 is a powerful and versatile tool designed for woodworking enthusiasts and professionals alike. This 15-amp planer features a 3-blade system that provides a smooth finish on a variety of materials. With a maximum cutting depth of 1/8 inch and a width capacity of 12 inches, it is ideal for planing rough lumber and achieving precise thickness. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 3-blade system, adjustable depth control, and dust port for easy cleanup.

Feature	Description
15-amp motor	Powerful motor for efficient planing
3-blade system	Provides a smooth finish and reduces tear-out
Adjustable depth control	Allows for precise thickness adjustments
Dust port	Connects to vacuum for easy dust collection
Lightweight design	Easy to transport and maneuver

Installation

Unpack and inspect the contents. Ensure all parts are included before setup.

Place the planer on a stable work surface.
Connect the dust port to a vacuum for optimal dust collection.
Plug the power cord into a suitable outlet.

WARNING! Always ensure the tool is unplugged when making adjustments.

First-Time Setup

Power on the planer and adjust the depth control to the desired setting.

Set the depth of cut using the adjustment knob.
Ensure the blades are sharp and properly installed.
Test the planer on a scrap piece of wood before actual use.

CAUTION! Always wear safety goggles and ear protection while operating the planer.

Specifications

Motor Power: 15 amps.
Planing Width: 12 inches.
Maximum Depth of Cut: 1/8 inch.
Blade Type: 3 high-speed steel blades.
Weight: 60 lbs.
Dust Port Diameter: 2-1/2 inches.
Voltage: 120V AC.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel. The planer also features a safety lock to prevent accidental start-up.

Connecting Devices

Ensure the vacuum is connected to the dust port for optimal performance.

Turn off the planer before connecting the vacuum.
Match the dust port to the vacuum hose.

Tip: Regularly check for clogs in the dust collection system.

Operating the Planer

Follow these steps for effective operation:

Adjust the depth of cut as needed.
Feed the wood slowly into the planer for a smooth finish.
Monitor the dust collection to ensure efficiency.

WARNING! Do not force the wood through the planer; let the tool do the work.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the dust port and blades after each use.
Check and replace blades as necessary.
Store the planer in a dry place to prevent rust.

Safety Information

Always follow safety guidelines when operating the planer.

Wear safety goggles and ear protection.
Keep hands away from the cutting area.
Do not operate the tool in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power connection	Check power cord and outlet.
Uneven cut	Blades dull	Sharpen or replace blades.
Excessive noise	Loose parts	Tighten screws and check for debris.
Dust not collecting	Clogged dust port	Clear any blockages in the dust collection system.

Service: For further assistance, contact Dewalt customer service.