Dewalt Planer DW735X Manual

The Dewalt Planer DW735X is a powerful and versatile tool designed for woodworking enthusiasts and professionals. This 13-inch thickness planer features a two-speed gearbox, allowing users to choose between a faster feed rate for dimensioning and a slower feed rate for a finer finish. With its 20,000 RPM cutter head speed and dual blades, the DW735X delivers smooth and precise cuts, making it an essential addition to any workshop.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 13-inch cutting width, two-speed feed rate, 20,000 RPM cutter head speed, dual blades, and an integrated dust hood.

Feature	Description
Two-speed gearbox	Allows for faster or finer feed rates
20,000 RPM cutter head	Provides smooth and precise cuts
Dual blades	Enhances cutting efficiency and finish quality
Integrated dust hood	Connects to dust collection systems for cleaner operation
Adjustable depth control	Allows for precise thickness adjustments

Installation

Unpack the planer and inspect all components. Place the planer on a stable work surface.

Ensure the area is clean and free of debris.
Connect the planer to a suitable power source.
Attach the dust collection system if available.
Adjust the height of the planer to your preferred working level.

WARNING! Ensure the planer is securely fastened to prevent movement during operation.

First-Time Setup

Power on the planer and familiarize yourself with its controls.

Set the desired feed rate using the gearbox switch.
Adjust the depth of cut using the depth adjustment knob.
Ensure the blades are properly installed and sharp.
Run a test piece to check settings and adjustments.

CAUTION! Always wear appropriate safety gear when operating the planer.

Specifications

Planer Width: 13 inches.
Cutter Head Speed: 20,000 RPM.
Feed Rate: Two-speed options (faster and finer).
Weight: 80 lbs.
Power Source: 120V AC.
Dust Port Diameter: 4 inches.
Blade Type: Dual reversible blades.

Controls and Settings

Access the main controls on the front panel, including the power switch, feed rate selector, and depth adjustment knob.

Safety Features: Emergency stop button and blade guard.

Connecting Devices

Connect the planer to a dust collection system using the integrated dust port.

Ensure the dust collection system is compatible with the 4-inch port.
Turn off the planer before making any connections.
Secure all connections to prevent dust leakage.

Tip: Regularly check and clean the dust collection system for optimal performance.

Operating the Planer

Follow these steps to operate the planer effectively:

Power on the planer and set the desired feed rate.
Feed the wood slowly and steadily into the planer.
Monitor the thickness and adjust as necessary.
Power off the planer after use and clean the area.

WARNING! Do not overload the planer; feed wood within the specified thickness limits.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the planer after each use.
Check and replace blades as needed.
Lubricate moving parts according to the manual.
Store in a dry place to prevent rust.

Safety Information

Always prioritize safety when using the planer:

Wear safety goggles and ear protection.
Keep hands away from the cutting area.
Do not operate the planer without proper training.
Ensure the work area is well-lit and free of hazards.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power supply issue	Check power connection and circuit breaker.
Uneven cuts	Blades dull or misaligned	Inspect and replace or align blades as necessary.
Excessive noise	Loose parts	Tighten all screws and check for loose components.
Wood jams	Improper feeding	Feed wood slowly and ensure it is within thickness limits.

Reset: Refer to the manual for reset procedures if available.

Service: Contact Dewalt customer support for assistance.