Dewalt Planer Manual DW733

The Dewalt Planer DW733 is a powerful and versatile tool designed for woodworkers and DIY enthusiasts. It features a 15-amp motor that delivers a smooth and consistent cut, making it ideal for planing rough lumber and achieving a fine finish. The DW733 is equipped with a 12-inch planing capacity, adjustable depth settings, and a built-in dust port for efficient dust collection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 12-inch planing capacity, adjustable depth settings, built-in dust port, and a sturdy base for stability.

Feature	Description
15-Amp Motor	Powerful motor for smooth and efficient planing
12-Inch Planing Capacity	Allows for larger workpieces to be planed
Adjustable Depth Settings	Precision control over the thickness of the cut
Built-in Dust Port	Connects to dust collection systems for cleaner operation
Sturdy Base	Provides stability during operation

Installation

Unpack the planer and ensure all components are included. Place the planer on a stable surface.

Connect the power cord to a suitable outlet.
Ensure the dust port is connected to a dust collection system if desired.
Adjust the depth settings according to your project requirements.

WARNING! Ensure the planer is securely positioned to avoid tipping during operation.

First-Time Setup

Power on the planer and familiarize yourself with its controls.

Set the desired depth of cut using the adjustment knob.
Test the planer on a scrap piece of wood to ensure proper operation.
Make any necessary adjustments based on the test cut.

CAUTION! Always wear safety goggles and hearing protection when operating the planer.

Specifications

Motor Power: 15 amps.
Planing Width: 12 inches.
Planing Depth: Adjustable up to 1/8 inch.
Weight: 60 lbs.
Dust Port Size: 2-1/2 inches.
Speed: 20,000 RPM.
Voltage: 120V AC.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel. The planer also features a safety lock to prevent accidental operation.

Tip: Always adjust the depth settings before powering on the planer.

Connecting Devices

Ensure the planer is unplugged before connecting any dust collection systems.

Attach the dust port to the dust collection system.
Ensure all connections are secure before powering on the planer.

Tip: Regularly check and clean the dust port to maintain optimal performance.

Operating the Planer

Follow these steps to operate the planer effectively:

Power on the planer and allow it to reach full speed.
Feed the wood into the planer at a steady pace.
Monitor the depth of cut and adjust as necessary.
Power off the planer when finished and unplug it.

WARNING! Do not place hands near the cutting area while the planer is in operation.

Maintenance

Regular maintenance is essential for optimal performance. Unplug the planer before performing any maintenance tasks.

Clean the dust port and surrounding area regularly.
Inspect the blades for wear and replace if necessary.
Lubricate moving parts as per the manufacturer's recommendations.

Safety Information

Always follow safety guidelines when operating the planer. Wear appropriate personal protective equipment, and ensure the work area is clear of hazards.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power source issue	Check power cord and outlet; ensure switch is on.
Uneven cuts	Blade wear	Inspect and replace blades if necessary.
Excessive noise	Loose parts	Tighten all screws and check for loose components.
Dust collection ineffective	Clogged dust port	Clear any blockages in the dust port.

Service: For further assistance, contact Dewalt customer service.