Dewalt Sander D26441 Manual

The Dewalt D26441 is a powerful and versatile sander designed for professional and DIY use. It features a 2.4 amp motor that delivers a speed of 14,000 OPM for a smooth finish. The sander is equipped with a dust collection system to keep your workspace clean and a rubber overmold for comfort during extended use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Sander 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.4 amp motor, dust collection system, rubber overmold, and ergonomic design.

Feature	Description
2.4 Amp Motor	Delivers 14,000 OPM for efficient sanding.
Dust Collection	Integrated system to minimize dust and debris.
Rubber Overmold	Provides comfort and control during use.
Ergonomic Design	Designed for ease of use and reduced fatigue.

Installation

Unpack the sander and inspect for any damage. Ensure all components are included.

Attach the dust bag securely to the dust port.
Plug the sander into a suitable power outlet.
Select the appropriate sandpaper for your project.

WARNING! Always wear appropriate safety gear when operating the sander.

First-Time Setup

Power on the sander and allow it to reach full speed before making contact with the work surface.

Choose the correct grit sandpaper for your task.
Adjust the speed setting if applicable.
Begin sanding with light pressure for best results.

CAUTION! Do not apply excessive pressure; let the sander do the work.

Specifications

Motor Power: 2.4 Amps.
Speed: 14,000 OPM.
Dust Collection: Yes, with dust bag.
Weight: 3.5 lbs.
Dimensions: 10.5 x 5.5 x 6 inches.
Power Source: Corded electric.

Controls and Settings

Access speed settings via the dial located on the top of the sander. The power switch is conveniently located for easy access.

Dust Collection: Ensure the dust bag is properly attached for optimal performance.

Connecting Devices

This sander is designed for standalone use and does not require additional devices for operation.

Ensure the sander is unplugged before changing sandpaper.
Match the sandpaper to the sanding pad.

Tip: Always use the correct grit for the material being sanded.

Operating the Sander

To operate the sander, hold it firmly and guide it over the surface to be sanded.

Start the sander and allow it to reach full speed.
Move the sander in a consistent motion across the surface.
Check the surface frequently to avoid over-sanding.

WARNING! Keep hands clear of the sanding pad during operation.

Maintenance

Regular maintenance is essential for optimal performance. Clean the dust collection system after each use.

CAUTION! Unplug the sander before performing any maintenance.

Safety Information

Always wear safety goggles and a dust mask when operating the sander. Keep the work area clean and well-lit.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Sander does not start	No power	Check power outlet and cord connections.
Excessive vibration	Improper sandpaper installation	Ensure sandpaper is securely attached.
Poor sanding performance	Worn sandpaper	Replace sandpaper with a new piece.
Dust not collected	Clogged dust bag	Empty and clean the dust bag.

Reset: If issues persist, consult the manual or contact customer support.