Dewalt Thickness Planer DW733 Manual

The Dewalt Thickness Planer DW733 is a powerful tool designed for woodworking enthusiasts and professionals. This portable planer features a 15-amp motor that delivers a smooth finish on various types of wood. With a maximum cutting depth of 1/8 inch and a feed rate of 28 feet per minute, it efficiently handles large projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 12-inch planing width, adjustable depth control, and a built-in dust port.

Feature	Description
15-Amp Motor	Powerful motor for efficient planing of hardwoods and softwoods.
Planing Width	12 inches, suitable for a wide range of materials.
Depth Adjustment	Easy-to-use depth adjustment knob for precise cuts.
Dust Port	Built-in dust port for connecting to a vacuum system.
Portable Design	Lightweight and easy to transport for job site use.

Installation

Unpack the planer and inspect for any damage. Place it on a stable work surface.

Connect the dust port to a vacuum for efficient dust collection.
Ensure the planer is on a level surface to avoid vibrations.
Plug the power cord into a grounded outlet.

WARNING! Always use proper safety gear when operating the planer.

First-Time Setup

Power on the planer and adjust the depth settings according to your material thickness.

Set the depth adjustment to the desired thickness.
Feed the wood slowly into the planer for a smooth finish.
Check the output for any adjustments needed.

CAUTION! Ensure hands are clear of the cutting area during operation.

Specifications

Motor Power: 15 Amps.
Planing Width: 12 inches.
Maximum Depth of Cut: 1/8 inch.
Feed Rate: 28 feet per minute.
Weight: 80 lbs.
Dust Port Diameter: 2-1/2 inches.
Dimensions: 25 x 20 x 18 inches.

Controls and Settings

Access depth settings via the adjustment knob located on the side of the planer. The power switch is conveniently located for easy access.

Dust Control: Ensure the dust port is connected to a vacuum for optimal performance.

Connecting Devices

Connect the dust collection system to the dust port for efficient operation.

Ensure the planer is turned off before making any connections.
Match the dust port to the vacuum hose for a secure fit.

Tip: Regularly check the dust collection system for clogs.

Operating the Planer

To operate the planer, follow these steps:

Power on the planer.
Feed the wood slowly into the planer.
Adjust the depth as necessary during operation.
Monitor the output for quality and adjust settings accordingly.

WARNING! Keep hands clear of the cutting area at all times.

Maintenance

Regular maintenance is essential for optimal performance. Clean the blades and dust port after each use.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always wear safety goggles and ear protection when operating the planer. Keep the work area clean and free of distractions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power connection	Check power cord and outlet.
Uneven cuts	Blade wear	Inspect and replace blades if necessary.
Excessive noise	Loose parts	Tighten screws and check for loose components.
Dust not collecting	Clogged dust port	Clear any blockages in the dust collection system.

Service: For further assistance, contact Dewalt customer service.