Dewalt Thickness Planer DW734 Manual

The Dewalt Thickness Planer DW734 is a powerful tool designed for professional woodworkers and DIY enthusiasts. This 15-amp planer features a 3-knife cutter head that provides a smooth finish and a maximum cutting depth of 1/8 inch. With a feed rate of 28 feet per minute, it efficiently handles various wood types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 3-knife cutter head, adjustable depth control, and a built-in dust port.

Feature	Description
15-amp motor	Powerful motor for efficient cutting
3-knife cutter head	Provides a smooth finish and longer knife life
Depth adjustment	Easy adjustment for precise cutting depth
Dust port	Connects to a vacuum for cleaner operation
Portable design	Lightweight and easy to transport

Installation

Unpack and inspect the contents. Place the planer on a stable surface.

Ensure the area is clean and free of debris.
Connect the dust port to a vacuum for optimal performance.
Plug the planer into a grounded outlet.

WARNING! Ensure the planer is securely positioned to avoid accidents.

First-Time Setup

Power on the planer and adjust the depth settings according to your project needs.

Set the desired cutting depth using the adjustment knob.
Run a test piece of wood to ensure settings are correct.
Make any necessary adjustments before starting your project.

CAUTION! Always wear safety goggles and ear protection when operating the planer.

Specifications

Motor Power: 15 amps.
Cutter Head Speed: 10,000 RPM.
Feed Rate: 28 feet per minute.
Maximum Cutting Depth: 1/8 inch.
Weight: 80 lbs.
Dimensions: 25 x 20 x 18 inches.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel.

Safety Features: The planer includes a safety lock to prevent accidental start-up.

Connecting Devices

Connect a dust collection system to the dust port for cleaner operation.

Ensure the planer is turned off before connecting.
Match the dust port to the vacuum hose.

Tip: Regularly check and clean the dust port to maintain optimal performance.

Operating the Planer

Follow these steps to operate the planer effectively.

Power on the planer and set the desired depth.
Feed the wood slowly into the planer.
Monitor the operation for any unusual sounds or vibrations.

WARNING! Do not overload the planer; feed wood at a steady pace.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the cutter head and dust port after each use.
Check and replace knives as needed.
Store the planer in a dry place when not in use.

Safety Information

Always follow safety guidelines when operating the planer.

Wear safety goggles and ear protection.
Keep hands away from the cutter head.
Do not operate the planer in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer won't start	No power	Check power connection and outlet.
Uneven cuts	Improper depth setting	Adjust depth and re-test.
Excessive noise	Worn knives	Inspect and replace knives if necessary.
Wood jams	Overfeeding	Feed wood at a slower pace.

Service: For further assistance, contact Dewalt customer service.