Dewalt Thicknesser DW733 Manual

The Dewalt DW733 is a powerful thicknesser designed for professional woodworkers. It features a 12-amp motor that provides a smooth and efficient cutting experience. The machine is equipped with a 3-blade cutter head that delivers a superior finish and can handle a variety of wood types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Thicknesser 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-amp motor, 3-blade cutter head, adjustable depth control, and a robust feed system.

Feature	Description
12-amp motor	Provides powerful performance for various wood types
3-blade cutter head	Delivers a smooth finish and efficient cutting
Adjustable depth control	Allows for precise thickness adjustments
Robust feed system	Ensures consistent material feeding
Dust port	Connects to a vacuum for easy cleanup

Installation

Unpack and inspect contents. Place on a stable surface.

Ensure the area is clean and free of debris.
Connect the thicknesser to a power source.
Attach the dust collection system if available.
Check that all components are securely fastened.

WARNING! Ensure the machine is unplugged during setup to avoid injury.

First-Time Setup

Power on the thicknesser and adjust the settings according to your needs.

Set the desired thickness using the depth control.
Run a test piece to ensure proper operation.
Adjust feed speed if necessary for optimal results.

CAUTION! Always wear safety goggles when operating the thicknesser.

Specifications

Motor Power: 12 amps.
Cutter Head: 3 blades.
Max Thickness: 6 inches.
Feed Rate: 28 feet per minute.
Weight: 80 lbs.
Dimensions: 25 x 20 x 18 inches.
Dust Port Diameter: 2.5 inches.

Controls and Settings

Access settings via the control panel located on the front of the machine. Key controls include power switch, depth adjustment knob, and feed speed control.

Safety Features: Emergency stop button and overload protection.

Connecting Devices

Ensure all connections are secure before operating the thicknesser.

Connect the dust collection system to the dust port.
Ensure the power cord is properly plugged into a grounded outlet.

Tip: Use a surge protector to safeguard against power surges.

Operating the Thicknesser

Follow these steps to operate the thicknesser safely and effectively.

Power on the machine and wait for it to reach operating speed.
Feed the wood slowly and steadily into the cutter head.
Monitor the thickness and adjust as necessary.
Turn off the machine after use and unplug it.

WARNING! Keep hands away from the cutter head while operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the cutter head and remove any debris after use.
Check and replace blades as needed.
Inspect the power cord for any damage.

Safety Information

Always follow safety guidelines when operating the thicknesser.

Wear safety goggles and hearing protection.
Keep the work area clean and well-lit.
Do not wear loose clothing or jewelry while operating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection issue	Check power cord and outlet.
Uneven thickness	Blade wear	Inspect and replace blades if necessary.
Excessive noise	Loose components	Tighten all screws and bolts.
Wood jams	Incorrect feed rate	Adjust feed speed and ensure proper alignment.

Reset: Refer to the manual for reset procedures if available.

Service: Contact Dewalt customer service for assistance.